Construction and other equipment - OT: Pettibone manuals

Print Page | Close Window

OT: Pettibone manuals

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=163247
Printed Date: 23 Aug 2025 at 2:05pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: OT: Pettibone manuals

Posted By: joelsplace
Subject: OT: Pettibone manuals
Date Posted: 30 Jul 2019 at 5:20pm

I know this is probably a dirty word but I have an old Pettibone Super 5 that I need manuals for. I've searched all over the web with no luck. I think the Super 4 is the same.

Anyone know where I could find some?

I've talked to Pettibone and they claim to have no information. They can get some parts but I have to give them the part number which I can't find.

-------------
1975 7040 w/Power Director

Replies:

Posted By: DiyDave
Date Posted: 30 Jul 2019 at 5:51pm

Try this question, over at Heavy equipment forums, Might have some luck, there...

https://www.heavyequipmentforums.com/" rel="nofollow - https://www.heavyequipmentforums.com/

-------------
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!

Posted By: joelsplace
Date Posted: 30 Jul 2019 at 6:27pm

Sounds like a great idea but it won't let me register. I just get "

Please correct the following errors:

Please enter a value that matches the required format.

But it doesn't tell me what the required format is or where the error is.

-------------
1975 7040 w/Power Director

Posted By: joelsplace
Date Posted: 30 Jul 2019 at 6:58pm

Figured it out. Registration question doesn't allow caps but no indication of that.

Thanks!

-------------
1975 7040 w/Power Director

Posted By: Coke-in-MN
Date Posted: 26 Aug 2019 at 11:29am

Had a Pettibome for several years and found most things were interchangable with other Mfg parts or old military parts . Got a outer axle from military surplus outlet, clutch was same as a IH L190 truck I was scrapping, found the hydraulic piston parts at local hyd shop as kind of industry standard . replaced the master cylinder with one for Ford 3/4 pickup from around the same year 1956 - vacuum brake canister changed ot 66 Chev 2 ton truck . The 3-71 GM engine and the Allison Torque converter and box were also standard items - used a Vickers hyd pump with a main pump and a Power steering pump as one unit but separate flow rated .

-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.

Posted By: joelsplace
Date Posted: 26 Aug 2019 at 11:42am

Thanks for the in info!

-------------
1975 7040 w/Power Director