Farm Equipment - wd rear pto hyd pumps

Print Page | Close Window

wd rear pto hyd pumps

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=162671
Printed Date: 22 Sep 2025 at 5:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: wd rear pto hyd pumps

Posted By: chevy1946
Subject: wd rear pto hyd pumps
Date Posted: 10 Jul 2019 at 7:02am

kinda new here, looking for info on serving my pto hyd res, had to remove front bucket for engine replacement. any help would be great

Replies:

Posted By: MACK
Date Posted: 10 Jul 2019 at 9:18pm

Don't under stand question, could you rewrite question? MACK

Posted By: Adam Stratton
Date Posted: 10 Jul 2019 at 9:38pm

Do you have a pump that attaches to the PTO shaft? There were several different types of them that could be plumbed all sorts of different ways. If your talking about your normal factory hydraulic reservoir, there should be a cap under the gas tank on the left side,basically just below the sediment bowl

Posted By: CTuckerNWIL
Date Posted: 12 Jul 2019 at 9:51am

The PTO has nothing to do with the factory hydraulic system on a WD. If you have a PTO driven hydraulic pump you need to figure out what you have, and how to check oil level.
Post a picture.
The WD hydraulis fill port has a dipstick and is on the left side of the torque tube, tucked away inside the frame rail.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF