Print Page | Close Window

Coil to mag type ignition

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=162582
Printed Date: 28 Apr 2024 at 4:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Coil to mag type ignition
Posted By: exSW
Subject: Coil to mag type ignition
Date Posted: 07 Jul 2019 at 7:48pm
Magnum 18 refit into a Brand X garden tractor. The old VT-17 was coil ignition. The new, magneto. The wiring is a salad. I want to wire a new stand alone start/run/charge circuit. Any suggestions or schematics.



Replies:
Posted By: HudCo
Date Posted: 07 Jul 2019 at 10:54pm
make sure that you change the key switch so that ground is off and no power can go to the ground or the magic smoke will come out of the magneto 


Posted By: HudCo
Date Posted: 07 Jul 2019 at 11:00pm
wiring is very simple we are doing an older jd116 that the wiring had been butchered very bad so we are going to re wire it this week with a pto saftey switch this will have completely new wire i will draw a diagram when we do it



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net