720 deck height adjustment
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=162421
Printed Date: 22 Feb 2025 at 9:50am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 720 deck height adjustment
Posted By: rrhead(SD)
Subject: 720 deck height adjustment
Date Posted: 02 Jul 2019 at 10:34am
How is the height adjusted on a 720 60" deck. I've been using the hydraulic lever to do this, but hard to be consistent. Thanks, rrhead(SD) ------------- 2 WDs,WD45,D-14,D-17,D-19D,180,7020,6080FWA,6080 2wd, 6080 2wd(cab),8050FWA,8550,4W-305,Massey 8250. Gleaner L3, R62 &R65 Agco-Allis 1616H & 1920H, AC 720, Terra-Tiger |
Replies:
Posted By: Dusty MI
Date Posted: 02 Jul 2019 at 12:30pm
|
That T handle on top of threaded shaft at outer ends at rear of deck, one at each end. ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: rrhead(SD)
Date Posted: 02 Jul 2019 at 4:40pm
|
I figured that sets the back of the deck. Is there any way to set the front? rrhead(SD) ------------- 2 WDs,WD45,D-14,D-17,D-19D,180,7020,6080FWA,6080 2wd, 6080 2wd(cab),8050FWA,8550,4W-305,Massey 8250. Gleaner L3, R62 &R65 Agco-Allis 1616H & 1920H, AC 720, Terra-Tiger |
Posted By: den/southern illinoi
Date Posted: 02 Jul 2019 at 7:05pm
|
That sets front and back. If you watch the rods that tie the back to the front of the deck you will see that it changes the angle of the front mountings. Den ------------- Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts. |
Posted By: rrhead(SD)
Date Posted: 02 Jul 2019 at 9:05pm
|
Ok, that helps allot. I will take a good look at it tomorrow. Thank you very much for the help. rrhead(SD) ------------- 2 WDs,WD45,D-14,D-17,D-19D,180,7020,6080FWA,6080 2wd, 6080 2wd(cab),8050FWA,8550,4W-305,Massey 8250. Gleaner L3, R62 &R65 Agco-Allis 1616H & 1920H, AC 720, Terra-Tiger |