Install G Weight
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=161800
Printed Date: 22 Oct 2025 at 3:39am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Install G Weight
Posted By: tmays
Subject: Install G Weight
Date Posted: 10 Jun 2019 at 5:20pm
| Tried searching the forum, but no luck. Probably from ignorance, but searching for ‘g’ gives error message less than three letters. Anyway, on installing the weight, looks like you place the weight where you want it, mark the hole and drill? Just checking before I maybe install this in the wrong spot. Thanks |
Replies:
Posted By: ibleedorange
Date Posted: 10 Jun 2019 at 7:30pm
|
I have 2 weights and have put them on 5 different G's and never had to drill a hole. Should be one there already. ------------- Tractors; If it runs, use it. Motorcycles: Ride em like today is your last day. |
Posted By: ibleedorange
Date Posted: 10 Jun 2019 at 7:31pm
------------- Tractors; If it runs, use it. Motorcycles: Ride em like today is your last day. |
Posted By: tmays
Date Posted: 10 Jun 2019 at 9:13pm
| I don’t have that hole. Mine is a ‘48. Maybe they didn’t have them in 48? |
Posted By: ibleedorange
Date Posted: 11 Jun 2019 at 8:07am
|
That's possible. I just bought a 1948. I'll check when I get to the farm tomorrow. Just when I think I know it all, the Allis Gods slap me back to reality. ------------- Tractors; If it runs, use it. Motorcycles: Ride em like today is your last day. |
Posted By: allis g
Date Posted: 11 Jun 2019 at 8:47pm
| my 48 G has the hole |
Posted By: Dusty MI
Date Posted: 12 Jun 2019 at 7:11am
|
My '48 also has the hole. ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: Tbone95
Date Posted: 12 Jun 2019 at 11:14am
| I hate when you can't find the G spot. |
Posted By: tmays
Date Posted: 12 Jun 2019 at 6:03pm
| Tried posting a pic, but no luck. Definitely no hole for it. Wish I knew why there wasn’t before I do it. Guess maybe they missed this one on the line. Thanks |
Posted By: tmays
Date Posted: 12 Jun 2019 at 6:03pm
Good one! Lol |
Tbone95 wrote:Posted By: JoeO(C-MO)
Date Posted: 12 Jun 2019 at 8:02pm
X2 Frustrating! ------------- D10 III, D15 II 3 pt, D15 II SC, 170 Gas w/shuttle, 175 Diesel UI ROPS, 185 w ROPS. AC 653 w/6 way blade, ROPS AC 615 Ind. WD45 running/Parts. |
Posted By: Dusty MI
Date Posted: 13 Jun 2019 at 8:39am
Maybe someone welded it shut. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: chaskaduo
Date Posted: 13 Jun 2019 at 10:03am
Tbone - JoeO, it has to be a gal G first. 
------------- 1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp |
Posted By: Ray54
Date Posted: 13 Jun 2019 at 10:17am
chas get with the times all that stuff you thought was what made the world go around has been tossed out in the trash. But I am not holding my breath waiting for the new lettered people (none M/F ) to reproduce. But somehow  we get more misfits than we can deal with anyway.I hope we don't need big investigation to find out who molested this poor G. As long as tmays has good drill bit I think the G would be Ok to have a whole like the rest.
|
Posted By: chaskaduo
Date Posted: 13 Jun 2019 at 10:38am
|
You said a whole lot there Ray. ------------- 1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp |