Farm Equipment - D17 262 Governor

Print Page | Close Window

D17 262 Governor

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=161626
Printed Date: 25 Oct 2025 at 12:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 262 Governor

Posted By: wade89
Subject: D17 262 Governor
Date Posted: 05 Jun 2019 at 9:58am

Picked up a D17 diesel that someone put a 262 combine motor in. The governor/throttle control rod looks to be wrong and was jammed behind the distributor. Took rod off, because it needed an extra 1-1/4” to come down to an idle and when that rod goes forward it needs almost an extra 3” to run anywhere near wide open. Does anyone have a picture of a D19 setup or similar conversion? Debating a cable type throttle system if I cant figure out the geometry that will work on this tractor.

Replies:

Posted By: CAL(KS)
Date Posted: 05 Jun 2019 at 11:03am

http://www.agcopartsbooks.com" rel="nofollow - www.agcopartsbooks.com

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15