Farm Equipment - 200 Rear Remote Problem

Print Page | Close Window

200 Rear Remote Problem

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=161086
Printed Date: 21 Aug 2025 at 9:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 200 Rear Remote Problem

Posted By: Red Bank
Subject: 200 Rear Remote Problem
Date Posted: 17 May 2019 at 6:33am

Last fall and last night while round baling hay after about three hours the door will not stay shut on the baler. I can switch sides and continue on but when I switch sides the hydraulic tie arm on the baler will drop and not stay up. I changed out the fittings on that side remote but that didn’t help. Is it a valve problem or a linkage problem? What do I need to check?

Replies:

Posted By: MACK
Date Posted: 17 May 2019 at 10:02pm

The only hold to the valve is the fit of spool to valve body. Other valve must be a tighter fit. A lot of bailers had a locking valve so tractor valve didn't have to hold gate shut. MACK

Posted By: Joe(TX)
Date Posted: 18 May 2019 at 8:22am

It sounds like the baler door is not latching. You didn't say what brand of baler. My Vermeer and New Holland have locks.

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A

Posted By: Red Bank
Date Posted: 18 May 2019 at 8:36am

It’s a New Holland 846.