ISO Carburetor
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=161069
Printed Date: 02 Sep 2025 at 11:34pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: ISO Carburetor
Posted By: Bill Deppe/AC Salvag
Subject: ISO Carburetor
Date Posted: 16 May 2019 at 8:32pm
Looking for a carburetor for a 175 tractor, good used or rebuildable Ia 563 357-2615
|
Replies:
Posted By: Bill Deppe/AC Salvag
Date Posted: 24 May 2019 at 2:15pm
Posted By: Fred in Pa
Date Posted: 24 May 2019 at 2:20pm
I have a Zenith for the 170 ,Sorry no M/S for 175
-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.
|
Posted By: HagerAC
Date Posted: 25 May 2019 at 10:33pm
I have a marvel off of a gleaner e if that would work for you? TSX 853 I believe it is
-------------
30+ A-Cs ranging from a 1928 20-35, to a 1984 8070FWA, Gleaner R52
|
Posted By: Bill Deppe/AC Salvag
Date Posted: 25 May 2019 at 10:45pm
These carburetors are unique due to it being mounted with the air intake towards the radiator and the breather being mounted in front of the radiator. Therefore the linkage for the gov and choke are reversed
|
Posted By: Steve in NJ
Date Posted: 26 May 2019 at 7:22am
|
Bill, Got a number off the Carburetor? I can look through my cores and see if I have one.... Steve@B&B
-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
Posted By: DrAllis
Date Posted: 26 May 2019 at 7:29am
|
Not only is the throttle lever bass-ackwards, the venturi is larger and I think the air horn (inlet) is larger diameter than the usual WD45/D17 TSX series.
|
Posted By: Bill Deppe/AC Salvag
Date Posted: 26 May 2019 at 1:30pm
My other 175 carburetor: Bendix 249982 Found another MS carb with reversed linkage: TSX 928 248868, my carb list shows its application for a 180
|
Posted By: DrAllis
Date Posted: 26 May 2019 at 7:29pm
|
One-Eighty's never had a Marvel carb.
|
Posted By: Bill Deppe/AC Salvag
Date Posted: 26 May 2019 at 11:08pm
Thanks for the clarification Dr Allis, my reference, the carburetorshop.com, listed the application of the TSX928 for a 180, which I questioned due to the size of the bowl and working for a 6 cylinder engine. Also, my 170-175 AC parts book(Jan '72) does not list a MS carburetor
|
Posted By: FREEDGUY
Date Posted: 27 May 2019 at 6:29pm
|
Google Roberts farm equipment and parts. That's where we acquired a NOS carb for our 180.
|
Posted By: Fred in Pa
Date Posted: 28 May 2019 at 6:51am
|
Bill got a carb .I sold him one yesterday .
-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.
|
|