Print Page | Close Window

CA Reverse Gears

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=161059
Printed Date: 02 Nov 2025 at 1:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: CA Reverse Gears
Posted By: JS1455v
Subject: CA Reverse Gears
Date Posted: 16 May 2019 at 5:54pm

Needing a little help on my 1958 CA transmission. I replaced all 3 reverse gears because they we worn and it was apart. Checked the inside and outside teeth before installing, but never thought to check the thickness. I could not get any gears to mesh up. Took it back apart and found the pinion reverse gear is ~.180” thicker than the old gear. Book shows 2 different part #’s for early and later. Never see more than 1 listed on parts websites. Thanks for the help.

uploads/14446/fullsizeoutput_452.jpeg" rel="nofollow - uploads/14446/fullsizeoutput_452.jpeg



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net