7040 Manuals? Parts?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160991
Printed Date: 06 Jun 2025 at 1:47am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7040 Manuals? Parts?
Posted By: joelsplace
Subject: 7040 Manuals? Parts?
Date Posted: 14 May 2019 at 3:36pm
|
I just hauled my 7040 home last night. It needs a lot of work. I need manuals, radiator, water pump, condenser, compressor & hoses, filters, several pieces of glass & gaskets for the cab, hinges and hardware for one side glass, center exhaust manifold, muffler etc. The plan is to change filters, oil and fuel and see if it will run before buying all the other parts I know it needs. Best place to get things in my list? Ebay was suggested for the manuals. Should it start without ether? Is it just needed below a certain temperature? Suggestions? Are the sleeves thin enough that it needs anti cavitation additive in the coolant? Is the Wix catalog accurate on the filters? Thanks!
|
Replies:
Posted By: REEDE
Date Posted: 14 May 2019 at 7:27pm
|
Engine oil filters are 74037047 for the tall filters or 74035556 for the short oil filters , tractor takes two. fuel filer is 74024223 old number or 71367687 is the new number. Air filter is 7066767 outer. . These are AGCO part numbers .
|
Posted By: exSW
Date Posted: 14 May 2019 at 7:39pm
| Check your pm's |
Posted By: johnkc
Date Posted: 14 May 2019 at 8:52pm
|
No ether, or very,very little ------------- I support the development of hybrid automobiles and alternative fuels as I need DIESEL fuel for my ALLIS CHALMERS! |
Posted By: exSW
Date Posted: 14 May 2019 at 8:54pm
No ether until it's blowing smoke out the stack. |
johnkc wrote:Posted By: joelsplace
Date Posted: 14 May 2019 at 9:47pm
|
What is very, very little? 1/2 second spray? Where do I get replacement cans? I'm guessing it's a factory system the way it is plumbed in. Thanks! |
Posted By: exSW
Date Posted: 14 May 2019 at 9:52pm
According to my 7010 manual the factory system delivers a metered amount. |
Posted By: joelsplace
Date Posted: 14 May 2019 at 9:55pm
| Ok so one squirt of whatever the system delivers? |
Posted By: Jim.ME
Date Posted: 15 May 2019 at 5:26am
|
You can use the on line parts books at http://www.agcopartsbooks.com/partsbooksn/login.aspx?region=northamerica" rel="nofollow - AGCO Parts Books . Sign in as a guest user. In the same box as the sign in you will see the link for AGCOpubs.com as well. Click on that link and it will take you to their store where you can purchase manuals. |
Posted By: joelsplace
Date Posted: 15 May 2019 at 7:01am
| Great info. Thanks! |
Posted By: Dan Hauter
Date Posted: 18 May 2019 at 10:05pm
| I purchased a 185 with 500 loader from an older couple. They had no idea where the manuals were. Went to see Lyle Hunsley south of Waverly, IL. Lyle's a former A-C dealer who has a shed FULL of parts & pieces. He went to a filing cabinet & came back with a brand new manual for my 185. Lyle's phone # is 217-691-8302. |
Posted By: DSeries4
Date Posted: 19 May 2019 at 10:29am
|
Original manuals can be found cheap on e-bay. For everything else, stay away from e-bay! ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: joelsplace
Date Posted: 19 May 2019 at 6:49pm
|
Other AC parts on eBay are bad? ------------- 1975 7040 w/Power Director |