Garden Tractors - 912 H Making into Hydro Lift

Print Page | Close Window

912 H Making into Hydro Lift

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160851
Printed Date: 22 Feb 2025 at 10:07am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 912 H Making into Hydro Lift

Posted By: Doug Acord
Subject: 912 H Making into Hydro Lift
Date Posted: 10 May 2019 at 8:21am

I Have a 912 H that is manual Lift now. I Have a 7117 simplicity roller with all the hydro lift parts. I know I need the spring and valve out of the 7117 pump. I also know I need everything that was attached to the hydro lift on the tractor. Is there any reason why this swap should not work?

Replies:

Posted By: Mikez
Date Posted: 10 May 2019 at 10:16pm

Good question. I'm woundering same thing

Posted By: Roger Nolin
Date Posted: 21 May 2019 at 4:32pm

It will work. Just put hydro lift on My 914 with electric lift. We had to change the rockshaft the lift handle on because the hyd cylinder is bigger than the electric cylinder. Soak your lift handle where it mounts on the shaft so it will slide off easy.Good luck. Hydraulic lift is so much easier for me than the toggle switch on the electric lift and a lot easier on the batter