Print Page | Close Window

S 16 New Holland / Arens

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160817
Printed Date: 01 Oct 2024 at 12:25pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: S 16 New Holland / Arens
Posted By: Coke-in-MN
Subject: S 16 New Holland / Arens
Date Posted: 09 May 2019 at 10:59am
I need the drive sheave that fits onto the PTO on back of tractor . Origional uas a coupling splined inside and a double belt pulley that was welded to that - in the end abolt holds it onto the PTO . 
 Seems daughter in law borrowed tractor - rand it and link pin cam out and she kept running it until that drive unit was junk - 
 Well I was going to weld on new pulleys but somehow I set it in a save spot so it would not get lost --- Have not found that spot again !

 It is about a 4" diameter 2 belt unit - uses a 3/8" x 1 1/2" bolt to hold unit onto PTO shaft . Arens bought the New Holland line of lawn equipment and most things interchange 


-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net