Farm Equipment - 170 front pump drive hub

Print Page | Close Window

170 front pump drive hub

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160791
Printed Date: 07 Sep 2025 at 11:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 170 front pump drive hub

Posted By: Alex09(WI)
Subject: 170 front pump drive hub
Date Posted: 08 May 2019 at 1:01pm

Does anyone know where I can get new hubs that bolt to the front crankshaft pulley to drive the hyd pump? The bolts are not evenly spaced so the ferd drive hubs wont work. Does anyone reproduce them? Once the splines wear out what does one do?

-------------
www.awtractor.com
A&W TRACTOR 920-598-1287
KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY

Replies:

Posted By: AaronSEIA
Date Posted: 08 May 2019 at 1:18pm

The parts bok says it should be the same as my D17 crank pulley. I've got a post on the Knowledge base about the Ford drive coupler that fits. Unless someone else has messed up your hub, it should be the same from the D17 through the 170.

AaronSEIA

Posted By: Alvin M
Date Posted: 08 May 2019 at 1:20pm

is it for loader pump drive is it gas or diesel

Posted By: DanWi
Date Posted: 08 May 2019 at 2:03pm

One of the vendors in the Old Allis News has some.

Posted By: Alvin M
Date Posted: 08 May 2019 at 3:06pm

countryside tractor has the parts or a kit 717-923-0421

Posted By: Tracy Martin TN
Date Posted: 08 May 2019 at 8:51pm

Alex, I make a hub and new shaft. Not exactly like original, but it won't wear out like the factory ones do. Tracy

-------------
No greater gift than healthy grandkids!

Posted By: Walter(MO)
Date Posted: 09 May 2019 at 11:07am

A local machine shop bored out the hub and pressed in a sleeve with original matching splines. Cost two years ago was less than $150.

Posted By: steve fischer
Date Posted: 09 May 2019 at 1:24pm

have new hub, shaft, sprocket and chain for both the gas and diesel 507-766-0551 Steve

Posted By: Eldon (WA)
Date Posted: 09 May 2019 at 1:33pm

I welded a new splined end on mine and then it also reached the unworn splines on the shaft. female end must not have been a close enough match as it only lasted about 40 hours....Agco had the parts at that time, but wanted over $800 for the parts!

-------------
ALLIS EXPRESS!
This year: