CA pin hitch draw bar
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160244
Printed Date: 23 Jan 2025 at 9:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CA pin hitch draw bar
Posted By: JaredC(WI)
Subject: CA pin hitch draw bar
Date Posted: 21 Apr 2019 at 9:43am
|
Put the draw bar on the CA yesterday as per the manual for the first time since I've had it. Where it pins on underneath, is there supposed to be a bushing of some sort between the pin and clevis? I ask because it's real sloppy and seems like there should be. Thanks. Jared |
Replies:
Posted By: Jim.ME
Date Posted: 21 Apr 2019 at 10:13am
|
None shown as a separate part in the parts book. The written description says clevis with bushing; for the clevis (Item 29) at the pin end of the drawbar. Someone might have a part number for the bushing. You might be able to have the clevis bored to true it up if it needs it and the bushing is gone. Then have a bushing made to fit. uploads/16335/CA_Pin_Hitch_Drawbar.pdf" rel="nofollow - CA_Pin_Hitch_Drawbar.pdf |
Posted By: JaredC(WI)
Date Posted: 21 Apr 2019 at 10:33am
|
Thanks, Jim! Thought there should be one there. Ill look tomorrow at work to see what would work. Tons of bushings available. If something isn't quiet right it'll be a good government job for the machinist :) Jared |
Posted By: littlemarv
Date Posted: 21 Apr 2019 at 11:27am
TedJ gave me a pin hitch drawbar this winter, here is a picture. I can clean it up and measure it tonight, if you'd like. ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: Dakota Dave
Date Posted: 21 Apr 2019 at 7:26pm
| Odds are you are missing the spacer tube in marks picture |
Posted By: JaredC(WI)
Date Posted: 21 Apr 2019 at 8:14pm
|
Yup, missing that. Measurements would be great! Thanks :) Jared |
Posted By: littlemarv
Date Posted: 21 Apr 2019 at 8:53pm
|
Got it cleaned up. I originally thought it was brass, but now that I got the grease off it, it is steel. Its a little oblong, she's obviously pulled a few implements in her day. 3" long. 7/8" I.D 1 3/8" O.D. ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: Ted J
Date Posted: 21 Apr 2019 at 10:54pm
Glad to be of use!  ------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Posted By: chaskaduo
Date Posted: 22 Apr 2019 at 7:16am
|
That's funny Ted. And more knowledge shared. ------------- 1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp |
Posted By: JaredC(WI)
Date Posted: 22 Apr 2019 at 10:27am
|
Awesome! Thanks a ton Jared |
Posted By: JaredC(WI)
Date Posted: 23 Apr 2019 at 10:38am
| Draw bar ain't sloppy any more :) Thanks again for the info! |
Posted By: littlemarv
Date Posted: 23 Apr 2019 at 11:33am
|
So did you find one, or make one? ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: JaredC(WI)
Date Posted: 23 Apr 2019 at 12:29pm
| The machinists at work did one up for me:) |