Pulling Forum - My machinist cut the fire ring groove too deep

Print Page | Close Window

My machinist cut the fire ring groove too deep

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=159701
Printed Date: 06 May 2024 at 11:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: My machinist cut the fire ring groove too deep

Posted By: Beirnesy
Subject: My machinist cut the fire ring groove too deep
Date Posted: 05 Apr 2019 at 10:15pm

My machinist cut the groove for the fire ring in the sleeves .058" deep and blue print said .030-.032" deep for .105 fire rings. So I have no crush on my fire ring. any band aid ideas or are 6 new liners headed to the scrap bin ?

-------------
1969 220,1967 190DXT,1968 190DXT, LGT's 710,,716

Replies:

Posted By: AaronSEIA
Date Posted: 06 Apr 2019 at 6:20am

Did he have the blueprints? Sounds like he owes you 6 new liners. Or fire rings that will work.

AaronSEIA

Posted By: Beirnesy
Date Posted: 06 Apr 2019 at 6:37am

Yes he had blueprint that FVP sent with the fire rings.

-------------
1969 220,1967 190DXT,1968 190DXT, LGT's 710,,716

Posted By: bsallis180
Date Posted: 06 Apr 2019 at 6:53am

I had this same thing happen years ago. I was told to use sleeves shims under the fire ring to take up the room. It worked I believe there are 2 thickness and one was still available. An old allis dearer would know or Doc

Posted By: NEVER green
Date Posted: 06 Apr 2019 at 10:10am

Cant you use thicker fire rings? Seal Tech makes any size.

-------------
2-8050 1-7080 6080 D-19 modelE & A 7040 R50