Gleaner 10bolt 5” spacers
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=159667
Printed Date: 15 Apr 2026 at 1:33am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Gleaner 10bolt 5” spacers
Posted By: AC7060IL
Subject: Gleaner 10bolt 5” spacers
Date Posted: 05 Apr 2019 at 8:11am
| Dished out my Gleaner’s Drive wheels to track differently, but need an additional 5” spacer on each wheel. Did Gleaner mfg such an item? It’s for a 78’ k2 that has the 10 bolt finals. |
Replies:
Posted By: SteveM C/IL
Date Posted: 05 Apr 2019 at 12:55pm
|
I'm sure the answer is no. What are you trying to accomplish? Get tires off the row? Good luck! Get an A2. It will track between the rows. |
Posted By: soybreedingboy77
Date Posted: 08 Apr 2019 at 10:28pm
| I put some 9" spacers on my F2 10 years ago. Ordered them from Unverferth. Less than $1000 if I remember. |
Posted By: MACK
Date Posted: 09 Apr 2019 at 9:13pm
| Before you put spacers on, remove final drives, remove cotter pin through adjusting nut and axle, drill to 1/4 and drive roll pin through nut and axle. MACK |
Posted By: SteveM C/IL
Date Posted: 09 Apr 2019 at 9:36pm
yeah. I didn't know about the shearing cotter pin deal till I had put mine back together .Yes it was the left side and yes the bin has had something like 2 ft added to right side.They did a good job. Looks factory.
|
MACK wrote: