Construction and other equipment - John Deere 6675 Skid Steer

Print Page | Close Window

John Deere 6675 Skid Steer

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=159640
Printed Date: 02 May 2025 at 12:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: John Deere 6675 Skid Steer

Posted By: Kurzy
Subject: John Deere 6675 Skid Steer
Date Posted: 04 Apr 2019 at 7:41am

Howdy,

Does anyone own one of these machines. I just bought it want to put rear weights on. I bought the weights but the brackets for the weights are not available. So going to build since i can not find used. I need a pic or need to know how many weights fit into the bracket. Or the width of the bracket where weights fit.

Thanks Kurzy

Replies:

Posted By: Jim.ME
Date Posted: 04 Apr 2019 at 9:17am

Did you do a web search by the part numbers? If these are the ones; first shot I found some aftermarket brackets at tractorpartsasap; and there were others like A&I. Some of the suppliers here may be able to get these as well

https://www.tractorpartsasap.com/weight-bracket-set-new-john-deere-am120232-am120233-119692.html" rel="nofollow - Brackets

Posted By: JohnCO
Date Posted: 04 Apr 2019 at 12:01pm

I believe New Holland built these for JD so the brackets for NH should work on yours. Might check with a NH dealer and other aftermarket outfits.

-------------
"If at first you don't succeed, get a bigger hammer"
Allis Express participant

Posted By: Kurzy
Date Posted: 04 Apr 2019 at 5:59pm

Howdy Jim,

I seen these and called, but they are after market. I want oem because they way they fit. These go on opposite on oem.

Thanks Kurzy

Posted By: Kurzy
Date Posted: 04 Apr 2019 at 6:02pm

Howdy John,

Yes New Holland built these for John Deere. But weights on New Holland were different. I am contacting skid steer salvage yards but no luck Yet.

Thanks Kurzy

Posted By: Coke-in-MN
Date Posted: 08 Apr 2019 at 10:35am

For some reason the JD machine had a lousy balance compaired to the NH even though both machines were built by NH - Had one of each and was a sorry day I sold the NH and got the JD - it went down the road a few months later - just a bad machine as far as balance

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: exSW
Date Posted: 08 Apr 2019 at 10:31pm

Wasn't the engine layout different in the Deere. They had Yanmars to NH had something else.

Posted By: Coke-in-MN
Date Posted: 09 Apr 2019 at 9:28am

Yes the NH used a 4 cylinder Perkins in ealier units then a 3 cylinder Ford after that - the Perkins units were a better machine in my opinion .. Not as touch of a engine on tuneing and vibration

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."