7060 dash part 70262733
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=158903
Printed Date: 03 Jul 2025 at 11:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7060 dash part 70262733
Posted By: rw
Subject: 7060 dash part 70262733
Date Posted: 09 Mar 2019 at 3:23pm
| Looking for this part number that covers the bulbs on the panel of warning lights for alt, oil pressure trans temp and pressure turn signals etc. Thanks for any help finding one! |
Replies:
Posted By: Alvin M
Date Posted: 09 Mar 2019 at 4:10pm
| did you check agco dealer |
Posted By: Michael V (NM)
Date Posted: 09 Mar 2019 at 4:15pm
| If ya find one...be sure your settin down when they tell how much it costs...I have one for a PD,, NOT FOR SALE |
Posted By: LB0442
Date Posted: 09 Mar 2019 at 4:20pm
This is number 70262732. I was able to get this from Brenda at Sandy lake a few years ago. They might have that number. |
Posted By: Unit3
Date Posted: 09 Mar 2019 at 11:34pm
|
I have 70258676. Like LBO442, mine has these 6 plus rear hsg. oil temp and trans oil filter. Mine are all in red including turn signal. My 70258676 might be for a PD trans and the 70262732 may be for a PS trans. Pretty nice dash you have there LBO442. ------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C |
Posted By: DougG
Date Posted: 10 Mar 2019 at 8:51am
| Its called a Legend I think, was only 14 bucks thru AGCO but this was on a 6060 a few years ago |
Posted By: LB0442
Date Posted: 10 Mar 2019 at 9:28am
|
That picture is the one I put in my 7080 last fall, I bet we have all bought one where the fuel shut off has gotten so bad it broke chunks out of the plastic dash. Price has gone up a little (well a lot more than $14 now) on that light panel. All total with that plastic dash, decals and the light panel, plus the 2 push button covers I think it was north of $350 for everything in the picture. Have another one for my 7580. Man I thought mopars were expensive to restore!
|
Posted By: rw
Date Posted: 10 Mar 2019 at 11:40am
|
Mine is power shift and AGCO said no longer available. I bought one years ago and misplaced. I wish I had not done that. may try to fashion one out of lexan or something and red sharpie to darken it. |
Posted By: Unit3
Date Posted: 10 Mar 2019 at 1:06pm
|
I am thinking about cutting a square in the plastic and building a cover plate on the left and right of center. I love the 8000 dash. ------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C |
Posted By: Michael V (NM)
Date Posted: 10 Mar 2019 at 1:15pm
| rw, need to get your ago dealer to do a search of other dealers,, there might be one on a shelf somewhere, the one I got came from Schmidt and Sons near Wichita KS,Sandy Lake would be a good one to call also... |
Posted By: 210Postin
Date Posted: 10 Mar 2019 at 3:06pm
| No stock anywhere ,on my last check 2 months ago |
Posted By: dpower
Date Posted: 10 Mar 2019 at 3:39pm
| you can try obsolete parts depot. They buy out old dealership parts surplus. My agco dealer is a part of that to be able to buy from them. I know on their website you can use the original allis part number and it will show if they have it. |
Posted By: Daehler
Date Posted: 10 Mar 2019 at 7:32pm
|
6,7, and 8000 series are at that point where they need parts, but their parts are being discontinued. They are too new to get rid of but too old to be considered "modern". ------------- 8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more! "IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!" |
Posted By: Unit3
Date Posted: 11 Mar 2019 at 8:04am
|
Just to throw salt in the wound, the dash in the 200 still looks great. I wonder if there could be a company that could stamp a dash face out of steel? ------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C |
Posted By: Unit3
Date Posted: 11 Mar 2019 at 8:07am
|
Who on here has a 3D Printer? New 6000, 7000, 8000, and the 4W's could all be reproduced. ------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C |
Posted By: Lynn Marshall
Date Posted: 19 Mar 2019 at 8:14am
| I found a used one of those legends the other day if anyone is interested. It is an all red panel and could be used for power director or power shift tractors plus the 4 wheel drive models. Good shape. |
Posted By: bigal121892
Date Posted: 19 Mar 2019 at 6:40pm
| That is a pretty large part for 3d printing, vacuum forming might be a better choice. Back in the day, I repaired mine by removing the fuel shut off cable, and putting a steel plate behind the dash, then re-installing the fuel shut cable. Looks cleaner, IMHO. Never really looked into it, but I wonder if the fuel shut off cable could be replaced with an electric solenoid. |
Posted By: Alex09(WI)
Date Posted: 24 Oct 2022 at 8:06pm
|
We have these dash light legend decals available. $65 each. Power
director #262732/70262732, Power shift #262733/70262733, 7580/7080/8550
#262734/70262734, 6060/6070/6080 #263199/70263199 and 7000 part
#258767/70258767. 262732 shown below.  ------------- www.awtractor.com A&W TRACTOR 920-598-1287 KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY |
Posted By: gvfd4521
Date Posted: 18 Dec 2023 at 4:45pm
| Do you still have some of the legends for 7060 dash? |
Posted By: Alex09(WI)
Date Posted: 20 Dec 2023 at 11:28am
Yes we do. ------------- www.awtractor.com A&W TRACTOR 920-598-1287 KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY |
gvfd4521 wrote:Posted By: SilverShoes
Date Posted: 01 Jul 2025 at 12:53pm
| Do you still have these available? 7045 power director |
Posted By: Alex09(WI)
Date Posted: 02 Jul 2025 at 11:31pm
|
Did you call the number listed above? https://awtractor.com/product/allis-chalmers-7010-7020-7045-7060-instrument-panel-legend-decal-262733-2/" rel="nofollow - https://awtractor.com/product/allis-chalmers-7010-7020-7045-7060-instrument-panel-legend-decal-262733-2/ ------------- www.awtractor.com A&W TRACTOR 920-598-1287 KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY |