Series 1 d17 hydraulic pan
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=158410
Printed Date: 01 Nov 2024 at 1:33am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Series 1 d17 hydraulic pan
Posted By: sstevens1985
Subject: Series 1 d17 hydraulic pan
Date Posted: 22 Feb 2019 at 11:25am
 Any thoughts on how the linkage finger for traction booster will go past that plunger? When I put my traction lever to the bottom of the quadrant it binds against that plunger causing my lift arms to stay raised. |
Replies:
Posted By: DiyDave
Date Posted: 22 Feb 2019 at 5:41pm
Theres a lot of fresh cut steel in that picture, is something worn bad enough to slip?
Take a look at this thread... https://www.allischalmers.com/forum/ac-d17-series-1-hydraulic-pump-removal-inspection_topic157763_post1324669.html#1324669" rel="nofollow - https://www.allischalmers.com/forum/ac-d17-series-1-hydraulic-pump-removal-inspection_topic157763_post1324669.html#1324669
|
Posted By: sstevens1985
Date Posted: 22 Feb 2019 at 8:02pm
 What is the purpose of that metal cap? It appears worn out and in bad shape. |
Posted By: sstevens1985
Date Posted: 22 Feb 2019 at 8:33pm
|
What is the purpose of that metal cap? It appears worn out and in bad shape. |
Posted By: MACK
Date Posted: 22 Feb 2019 at 9:32pm
| I cannot tell much from pictures, but most likely place is cam roller worn out and maybe cam lobe. MACK. |