Pulling Forum - Custom Pistons

Print Page | Close Window

Custom Pistons

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=158317
Printed Date: 27 Nov 2024 at 8:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Custom Pistons

Posted By: gcalent
Subject: Custom Pistons
Date Posted: 19 Feb 2019 at 8:52am

Looking for recommendations for someone to make pistons, they are not for a tractor but a 1930 IH truck, they are an unusual compression height.

Thanks

-------------
Pullin With AC

Replies:

Posted By: PaulB
Date Posted: 19 Feb 2019 at 9:25am

Most any of the places making racing piston will do custom orders.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: CAL(KS)
Date Posted: 19 Feb 2019 at 9:29am

Most of the big name brands can make you custom pistons or reproduce something out of spec. Im going to have some made through Crank Machine Service. 618 401 238six for a project that requires a taller comp height than anything mass produced. With a fiberglass resin cast of the head chamber they can match the piston to it.

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15

Posted By: MACK
Date Posted: 20 Feb 2019 at 9:31pm

Ross can make some good forged pistons if you need that type of material. MACK

Posted By: d17brown
Date Posted: 21 Feb 2019 at 2:35pm

i have used Ross, pretty goo to deal. might check Summit racing also

-------------
phil