Need to get the 7G lit off
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=158021
Printed Date: 06 May 2024 at 5:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Need to get the 7G lit off
Posted By: DMiller
Subject: Need to get the 7G lit off
Date Posted: 09 Feb 2019 at 2:21pm
Had a smallish white oak come down ON the back fence, Loads of widow makers so need to get my old gal lit up and drag some out.  
|
Replies:
Posted By: DMiller
Date Posted: 09 Feb 2019 at 2:23pm
Was not away from it fifteen minutes and this one shifted
|
Posted By: acd17toy
Date Posted: 09 Feb 2019 at 6:22pm
|
DMiller, Why the V cut on the downed log in the one picture with your saw setting by the cut?
|
Posted By: DMiller
Date Posted: 10 Feb 2019 at 8:22am
| So I could get a 24" bar through it without pinch. Used that technique a lot in my younger days, kick a small wedge out to allow deeper cut and less tree to bring back out of when have less ability to get at the underside. Nice square edge to set steel wedges to. |
Posted By: DMiller
Date Posted: 11 Feb 2019 at 5:12pm
| Well NO tractor today, ice storm yesterday, a Royal PITA then rain from early hours all thru the day today, may be march before dry enough to get back in there. |
Posted By: NomoreJohnDeere
Date Posted: 12 Feb 2019 at 3:00am
|
Too soggy here as well ------------- HD3 |
Posted By: jerbob
Date Posted: 13 Feb 2019 at 1:52pm
|
Same conditions in Michigan. Freezing rain for Monday and Tuesday with 8 inches of blowing snow and 19 degrees in Michigan. I hate not being able to do any serious work on any of the equipment due to cold and wind. Bobcat needs seals replaced on control valve. Need decent weather as you have to work without gloves. Oliver needs all fluids changed and that is best done when a little nicer out. HD16 Im itching to power wash and steam everything off to get started working on some priming and painting but too damn cold. ------------- HD16DC, Bobcat 863 Turbo, Oliver 1855, John Deere 855, |
Posted By: DMiller
Date Posted: 13 Feb 2019 at 2:38pm
| Froze tight last night so dragged batteries down and old Allis busted right off, a nice warm up and off to the back easy on solid ground. Got the bigger junk out of the way just as the Greasy started to set in, tried to drag out the log but too slick just got it out of the way and went to setting fence repairs. Managed to get all patched back in and trundled back to the barn put everything away for the storm coming Fri-Sun. 3-6" snow predicted. |