Pulling Forum - 7000 torque tube question

Print Page | Close Window

7000 torque tube question

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=157948
Printed Date: 27 Nov 2024 at 9:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7000 torque tube question

Posted By: jeremyroff
Subject: 7000 torque tube question
Date Posted: 06 Feb 2019 at 7:58pm

Does anyone know how much wider and heavier the 7000 torque tube is than the 190 tube? And does it have more clutch room? Looking to install profab or Atlas trans inside it.

Replies:

Posted By: DrAllis
Date Posted: 07 Feb 2019 at 7:21am

It is longer front to rear in the area of the triple clutch pack. Diameter is about the same as the clutch discs are the same p/n. How much weight?? I have no idea. Not a lot. Less than 200 lbs for sure on a bare housing. A 7000 torque tube does NOT bolt up to a 190/200 rear end as it is. Get a split gasket and you'll see what I mean.

Posted By: jeremyroff
Date Posted: 07 Feb 2019 at 8:04am

Thanks Man... thats what I was wondering... My son wants to start building a tractor and I figured we should try to do all the improvements and upgrades that didn't get done on mine.

Posted By: DrAllis
Date Posted: 07 Feb 2019 at 9:30am

What weight classes and HP level are you going to be in for a Pro-Fab transmission ??

Posted By: bsallis180
Date Posted: 08 Feb 2019 at 2:24pm

Seen the SCS 3 speed gear boxes in the 180-190 housing. I talked to the owner of the one I seen and a tube chassis is recommended. The housing is cut up pretty good. Everything but the rearend is dry

Posted By: jeremyroff
Date Posted: 17 Feb 2019 at 8:11pm

Not much... Eventualy would like to see what mine has or maybe a little more. LLSS