Farm Equipment - Woods question

Print Page | Close Window

Woods question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=157736
Printed Date: 16 Nov 2024 at 2:48pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Woods question

Posted By: Baxter
Subject: Woods question
Date Posted: 31 Jan 2019 at 11:34am

Hello everyone. I'm new here. I now with woods mowers mounted on C Allis for many years now. An L306 and 59. I have a friend with a b and was wondering if woods makes the lower tube for the narrower b for the L 306.The telescopic tubes for the no. 59 mower that I have are all for reight turn blades.The b is newer so it has dish wheels so can be set out.

Replies:

Posted By: tadams(OH)
Date Posted: 31 Jan 2019 at 2:51pm

Go to the wood web site and check

Posted By: Sugarmaker
Date Posted: 31 Jan 2019 at 3:02pm

Baxter,

Welcome! We need some pictures!

Regards,

Chris

-------------
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.

Posted By: steve(ill)
Date Posted: 31 Jan 2019 at 3:44pm

Yes........

https://www.messicks.com/wo/95272" rel="nofollow - https://www.messicks.com/wo/95272

-------------
Like them all, but love the "B"s.

Posted By: Baxter
Date Posted: 31 Jan 2019 at 4:43pm

Hello again. It is 30 degrees below zero here. The tractor is a simple B with hydraulic that works. 1953 so a C engine. I have worked with L306, 59 and L59 mowers but have never seen the mounting tube for a B for a left turn mower because they are solid where my 59 tube is telescopic so I think would work on either tractor but is for right turn blades. Thank you all for your help.

Posted By: Dick L
Date Posted: 31 Jan 2019 at 5:21pm

The adjustable (telescopic) will work for both. It is how you thread the belt on the mower that makes the difference between the right or left hand cut.

Posted By: DiyDave
Date Posted: 31 Jan 2019 at 5:28pm

Yep, its just a twist, one way or the other...

Posted By: CTuckerNWIL
Date Posted: 31 Jan 2019 at 9:33pm

What Dick said. I had the 3 piece push bar on a Woods and could run it either way. You can go buy a new single piece bar and it will have the exact same configuration of the idler pulleys as the 3 piece bar.
You route the belt different, to get right or left rotation of the spindles.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Baxter
Date Posted: 01 Feb 2019 at 4:59am

Thank you everyone for your help. I am new here and already am having a great experience. You guys rock!

Posted By: MikeinLcoMo
Date Posted: 01 Feb 2019 at 8:59am

I have a Woods tube painted P.O.#1 with no pulleys I'd like to get it out from under my feet. One piece tube.

-------------
39B 42B 48C SFW 52Cub Cub Cadet 70 S14 Speedex M14 Speedex S18 Speedex

Posted By: Baxter
Date Posted: 01 Feb 2019 at 9:44am

Hi Mike. Thank you for the post. Where are you located?

Posted By: MikeinLcoMo
Date Posted: 02 Feb 2019 at 8:43am

South central Missouri.

-------------
39B 42B 48C SFW 52Cub Cub Cadet 70 S14 Speedex M14 Speedex S18 Speedex

Posted By: Baxter
Date Posted: 02 Feb 2019 at 10:28am

Probably not cost effective for me to try to get it. Thank you for posting.