need drive sheave
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=15725
Printed Date: 04 Feb 2025 at 10:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: need drive sheave
Posted By: DanNESD
Subject: need drive sheave
Date Posted: 26 Jul 2010 at 1:04pm
|
I need the drive sheave assembly for a #5 mower going on a B (part # 70802145) if I can't find the complete sheave the hub (part # 70802147) would help in making one myself. I need one for an 1 1/8 PTO shaft. Any help will be greatly appreciated, Thanks in advance!
Dan
|
Replies:
Posted By: orangereborn
Date Posted: 26 Jul 2010 at 5:32pm
|
This the one your needing? Dale |
Posted By: Dusty MI
Date Posted: 26 Jul 2010 at 5:53pm
|
If you can't find an original AC one I would think a 2 piece Browning would work. There is a split taper bushing thats 1 1/8" dia. If I knew what size the pulley is, both diameter and belt width, I look to see it there's a pulley that would work with the 1 1/8" bushing. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: BrettPhillips
Date Posted: 26 Jul 2010 at 8:01pm
| A number 5 would use a drive sheave with two grooves, and the Outside Diameter would be a little smaller too... |
Posted By: DanNESD
Date Posted: 26 Jul 2010 at 10:41pm
| The picture Dale posted is the one I need. Do you know where I can get one? The belt is still available through Agco. |
Posted By: orangereborn
Date Posted: 28 Jul 2010 at 7:10pm
Dan....This is what I have. Thanks....Dale 
|
Posted By: norm [ind]
Date Posted: 28 Jul 2010 at 7:15pm
| all the pulleys i have ever seen have been the 1 1/8 '' size have one in the barn |