Farm Equipment - I-600 engine choices

Print Page | Close Window

I-600 engine choices

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=156818
Printed Date: 12 Sep 2025 at 7:50am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: I-600 engine choices

Posted By: BrianC,Ont
Subject: I-600 engine choices
Date Posted: 31 Dec 2018 at 5:47am

I need to know what will swap into my forklift in place of the 160/149. I can do fab work. I have a good 201 and a AD3-152 Perkins also.

Thanks. Brian

-------------
35WC on steel, B with belly mower, D17 puller, D15 Series II puller, D15 Series II with loader, 608 Lawn Tractor

Replies:

Posted By: MACK
Date Posted: 31 Dec 2018 at 6:11am

None except D15D without adapter plate. MACK

Posted By: BrianC,Ont
Date Posted: 31 Dec 2018 at 9:44am

Mack, do you know of anyone that might have done the 201 swap with the adapter plate. Or maybe the Perkins.

-------------
35WC on steel, B with belly mower, D17 puller, D15 Series II puller, D15 Series II with loader, 608 Lawn Tractor

Posted By: AJ
Date Posted: 31 Dec 2018 at 11:06am

In order to get that 201 to fit in there you'll spend about as much money/time as to find a donor 160/149.

-------------
Can't fix stupid

Posted By: orangeman
Date Posted: 31 Dec 2018 at 11:07am

BrianC- Is the 149 or 160 beyond rebuild, or just looking to add a little more HP?

Orangeman

Posted By: DrAllis
Date Posted: 31 Dec 2018 at 11:32am

A 201/226 is too wide to fit between the side frames. The flywheel is too large and too deep to fit into the bell housing.