allis B oil dip stick tube
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=15664
Printed Date: 04 Feb 2025 at 8:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: allis B oil dip stick tube
Posted By: Rob G.
Subject: allis B oil dip stick tube
Date Posted: 25 Jul 2010 at 10:26am
|
The tube that the dip stick goes in is broke off flush with the block. Any chance someone knows where I can find one?
Thanks
|
Replies:
Posted By: Bill Long
Date Posted: 25 Jul 2010 at 10:30am
|
Rob, I can't help you but I have to say that the strangest things happen over time. You know I bet we never had one in stock in our parts department. Take good care of my favorate.
Good Luck!
Bill Long
|
Posted By: Jeff Z. NY
Date Posted: 25 Jul 2010 at 10:39am
|
Checking with someone who may have one.
I'll get back to you when I hear back from him. I heard back from him and he doesn't have one. Sorry. |
Posted By: R Aiken
Date Posted: 25 Jul 2010 at 10:49am
|
Rob G. wrote:Posted By: wigtrain
Date Posted: 25 Jul 2010 at 12:15pm
|
Have had this happen twice to blocks I have taken to local shop for tanking. If you have the p[ieces take them to any machine shop or someone who has a hobby lathe and have a replacement made. They are originally made from low grade aluminum and lightly pressed into the block. I've been making my replacements from brass and unless you're a pureist they work fine. I'll check to see if I kept the dimensions from the last couple I made. If so I can turn another if you need one. ------------- Jim Wiggin |
Posted By: Rob G.
Date Posted: 25 Jul 2010 at 3:51pm
|
Jim if you could give me the demensions I could make my own. My Dad has a lathe. I don't have the part thats broke off , I think it broke off when it was at the engine shop getting tanked. I would really appreciate it.
THANKS
|
Posted By: wigtrain
Date Posted: 27 Jul 2010 at 9:07am
|
------------- Jim Wiggin |
Posted By: wigtrain
Date Posted: 27 Jul 2010 at 11:35am
|
Can you please send me your e-mail address. Send to
mailto:wigtrain@roadrunner.com - wigtrain@roadrunner.com
I have a print of the part but am having problems putting it onto this site in a size that is workable. I've resized it several times and converted it to a jpeg but no luck. Sorry for the delay. I'm hoping that I will have more sucess sending an attachment directly to you. ------------- Jim Wiggin |
Posted By: JimD
Date Posted: 27 Jul 2010 at 12:27pm
|
We have some.
JimD ------------- Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central. We have new and used parts. 877-378-6543 |