Farm Equipment - WD45 transmission

Print Page | Close Window

WD45 transmission

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=15656
Printed Date: 04 Feb 2025 at 4:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD45 transmission

Posted By: Dave in il
Subject: WD45 transmission
Date Posted: 24 Jul 2010 at 10:23pm

My WD45 shifter popped out of place & the transmission was stuck in reverse. Pulled the snap ring out of the top of the shift tower and removed the shift lever. I tried a long screw driver to shift it into neutral but but I couldn't budge it. So I pulled the top off the transmission and drained and flushed it out, everything looks good. Put the transmission and the shift forks in neutral. The problem I have now is getting the long fork into it's coller when putting the top on back on the transmission. The two on top are no problem but the long one is not cooperating. What am I doing wrong?

Replies:

Posted By: DrAllis
Date Posted: 25 Jul 2010 at 7:15am

Try shifting the tranny AND the shift cover into second gear positions....it's a challenge to get one of those back on correctly.

Posted By: CTuckerNWIL
Date Posted: 25 Jul 2010 at 9:37am

It seems to me I tipped it to the left. Then while dropping it back in you rotate it to the right. Sounds easy enough.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF