AC WD expansion plug
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=155884
Printed Date: 11 Sep 2025 at 11:59pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC WD expansion plug
Posted By: Wyattstoll89
Subject: AC WD expansion plug
Date Posted: 25 Nov 2018 at 12:37am
| I have a wd , one of the expansion plugs in the head was rusted threw and letting coolant by. I replaced the plug by just tapping a new one in.I started the tractor today after being down for a couple months to find water was seaping in around the plug. Was i sapost to put any sealent around the plug? What is the exact size is the plug? What sealent should i use ? I also installed a new radiator today and noticed a brown substace bubbling out of where the headgasket is ? Any help would be much appreciated! |
Replies:
Posted By: DWC17
Date Posted: 25 Nov 2018 at 1:55am
| Any of the steel plugs that I installed, I always put Permatex around the plug then tapped it in. |
Posted By: Wyattstoll89
Date Posted: 25 Nov 2018 at 1:54pm
|
The one i bought from o reileys, didnt have a lip like the other one had so i dont know if that matters? Sorry i had to edit , was half alseep 
|
Posted By: MACK
Date Posted: 25 Nov 2018 at 8:21pm
| I always put red loctit on a plug. MACK |
Posted By: SteveM C/IL
Date Posted: 26 Nov 2018 at 2:13pm
| You have to have the rim/lip on the plug.That's where it seals.Dad always smeared Permatex #2 on them. |