Time For Bearings Ina Mower
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=15575
Printed Date: 27 Sep 2024 at 1:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Time For Bearings Ina Mower
Posted By: Dick L
Subject: Time For Bearings Ina Mower
Date Posted: 22 Jul 2010 at 8:44pm
Time for bearings in my Woods L59 mower under my one B. While at it I let things get out of hand.  |
Replies:
Posted By: kip in cny
Date Posted: 22 Jul 2010 at 8:58pm
|
nice work is that a yanmar in the back ground ? ------------- 160 CA 920diesel 5020 HD-3 |
Posted By: Dick L
Date Posted: 23 Jul 2010 at 7:41am
| That be a Simplicity 95-23 or same as a 5020. I had at one time started to make it look like an Oliver. I put Allis Chalmers C cast centers on it a coupla years ago so I am not sure what to call it. |
Posted By: Boomer
Date Posted: 23 Jul 2010 at 12:46pm
| What size of bearings are they? I will need to do that with mine in a year or so. Is it hydraulic lift? If so can you send me a picture of the "v" shaped piece that attached to the cylinder/frame. |
Posted By: Mojo
Date Posted: 23 Jul 2010 at 12:56pm
|
Boomer, I see a manual lift handle so I'd say it ain't hydraulic lift.
mojo/Mike |
Posted By: Dick L
Date Posted: 23 Jul 2010 at 4:33pm
|
Boomer, you can get bearings here at a fair price. You can look at the parts drawings as well. Click on the spindle assembly line at the left. Prices are then on the right. http://www.messicks.com/Woods/1122.aspx - http://www.messicks.com/Woods/1122.aspx |
Posted By: Dick L
Date Posted: 23 Jul 2010 at 6:02pm
This might be the part you are wanting a picture of Boomer. |
Posted By: Boomer
Date Posted: 23 Jul 2010 at 6:50pm
| Now I am officially confused. My L59 is on a model C. I bought it like this. The triangle piece is in the inside of the flat bar, so when I raise the lift, the triangle hits the starter. What does the other end of that picture look like? Do they mount the same on a B or C, from the picture it looks like a B? |
Posted By: Dick L
Date Posted: 23 Jul 2010 at 7:59pm
|
Well I am not confuse at all. I don't know enough about it to be confused. My wife bought me that tractor in Oklahoma eight years ago as a wedding gift. I brought it up here along with her. Honeymoon was so long that I lost interest in the tractor. The tractor had a belly mower under it of the bush hog type. Single spindle with the kick back blades. The mower needs a new deck welded on the top. I keep thinking I should fix it up to mow the pastures rather than the L 59 mower I am repairing now. It is jerry rigged with a pipe going thru an other piece of pipe welded to a hunk of angle iron. I thought you wanted to see the actual shape of the tri angle part. A Woods manual should show how it should mount. |