516 ALLIS MOTOR
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=15561
Printed Date: 04 Feb 2025 at 4:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 516 ALLIS MOTOR
Posted By: DARRELL(PEI)
Subject: 516 ALLIS MOTOR
Date Posted: 22 Jul 2010 at 2:34pm
|
I found this 516 Cubic Inch motor near where I live, It's on a generater. Just wondering what It will fit into on ALLIS tractors and how much HP It should produce. Any other Info you want to give I,ll take on this motor.
|
Replies:
Posted By: Skyhighballoon(MO)
Date Posted: 22 Jul 2010 at 2:59pm
Darrell - I think the 516 was only used in N7 Gleaner combines. I don't believe it was used in any ag tractors, not sure about construction equipment. I think the 744? went in tractors like the 8550 and 4W-305. Mike
-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers
|
Posted By: Calvin Schmidt
Date Posted: 22 Jul 2010 at 3:01pm
Darrell, That is an 11000 series engine that was used in dozers etc. I think it was also used in the Gleaner N7. I have lots of info at the house that I can post later. My local generator dealer also has a 100 kw 1ph generator for sale with that engine.
-------------
Nothing is impossible if it is properly financed
|
Posted By: Tim-tn
Date Posted: 22 Jul 2010 at 3:17pm
|
The 516 was in one series of combines, was never put in ag tractors. have heard of it being put in tractors for pulling purposes. Would have to do some fabrication to put it in. Jerry in KS. has several of them 516's he has taken out of combines. Hope this helps.
|
Posted By: DARRELL(PEI)
Date Posted: 22 Jul 2010 at 4:11pm
|
Is It possible to get this motor into a 220.
|
Posted By: DARRELL(PEI)
Date Posted: 22 Jul 2010 at 4:13pm
|
Calvin can you let me know the asking price of that motor near you, I,d like to compare prices just to make sure it,s In line.
|
Posted By: Mike NEIN
Date Posted: 22 Jul 2010 at 5:35pm
|
I had a 516 out of an N-7 and put it in my N-6. I think they had around 300 HP. I loved that motor, if they would have put it in the 7580's there might not be near as many Cummins out there.I'd love to run that 220 if you put it in.
|
Posted By: Calvin Schmidt
Date Posted: 22 Jul 2010 at 6:46pm
A year ago they were asking $6000 for the complete unit with about 900 hours showing.
-------------
Nothing is impossible if it is properly financed
|
Posted By: injpumpEd
Date Posted: 22 Jul 2010 at 6:56pm
the 516 was used in hd11 crawlers, and 745 loaders. those used roosa fuel systems. the N7 version got a bosch P pump and 275 hp. I too thought that would have been a better choice for larger tractors, but it is still one of the old buda designed engines, though ac re-designed to direct injection in the 60's. the 8550 used a 731, which is a de-stroked version of the old buda 844, or 16000. I have seen talk on here or on the few the proud the orange about putting a 516 in a tractor, so it's been done. good luck.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: JPG AUSTRALIA
Date Posted: 22 Jul 2010 at 7:03pm
|
allis graders used them also
|
Posted By: Steve M C/IL
Date Posted: 22 Jul 2010 at 11:35pm
|
Hd 11 B dozer my brother had used a 516 with a P pump and was rated @140 hp.Would work the pants off a D6C of same vintage
|
Posted By: Good
Date Posted: 23 Jul 2010 at 8:30am
|
I wonder what max cube would be if you bored and stroked a 516?Do they have more meat in the block than a 426?
|
Posted By: DARRELL(PEI)
Date Posted: 23 Jul 2010 at 5:46pm
|
anyone know If motor kits are still available for this motor.
|
Posted By: JPG AUSTRALIA
Date Posted: 24 Jul 2010 at 6:29am
|
well darrel I bought a engine kit here in aus a few years ago,so I,d imagine the would be easy to get in your neck of the woods.
|
Posted By: DARRELL(PEI)
Date Posted: 24 Jul 2010 at 5:01pm
|
when you live on the east coast of Canada I don,t think anything comes easy, I live almost as far from AC central as you do JPG. I,m a rare breed when It comes to AC In this neck of the woods. After finding the only 220 around I can only hope to get'er running some day soon. 426's don't pop every day In this part of the world, we have a lot of older and smaller AC's but not the big rigs. Thanks everyone for the answers and I will give It a shot if i can purchase the 516 before anyone else gets to It.
|
Posted By: norm [ind]
Date Posted: 24 Jul 2010 at 7:59pm
|
we have a used 11000 engine for sale ran when it was taken out of grader has belt driven blower 1-800-254-3116 is under cover in garage
|
|