Garden Tractors - HB112 Front Wheel Removal

Print Page | Close Window

HB112 Front Wheel Removal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=155534
Printed Date: 22 Feb 2025 at 11:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HB112 Front Wheel Removal

Posted By: charles.link@aig.com
Subject: HB112 Front Wheel Removal
Date Posted: 11 Nov 2018 at 4:01pm

I have a 1968 HB112 and I need to remove the front wheel. There is a metal hub in the center of the wheel. How do I remove this? Does it unscrew or do I need to pop it off somehow? Any help would be appreciated.

Replies:

Posted By: Dave H (NE)
Date Posted: 11 Nov 2018 at 5:03pm

the cap is pushed in to the wheel center. tap it side to side to work it out or use a large pair of pliers and work it side to side and pull at same time.

Posted By: charles.link@aig.com
Date Posted: 12 Nov 2018 at 7:25am

Thank you very much.

Posted By: Mikez
Date Posted: 12 Nov 2018 at 7:43am

Then when you get the cap off there's a collar with a set screw in it holding wheel bearings. Takes alen wrench to get set screw

Posted By: charles.link@aig.com
Date Posted: 12 Nov 2018 at 7:54am

That's good to know. The parts diagrams I was findind did not explain how to pull it all apart and I do not want to presume and start breaking stuff

Posted By: macvette
Date Posted: 12 Nov 2018 at 4:27pm

Just make sure when you put the collar back on, you completely tighten it with the allen wrench - I would guess you know how I found out mine wasn't tight enough after using tractor for a while!