Construction and other equipment - Carco Winch for 65 HD-6

Print Page | Close Window

Carco Winch for 65 HD-6

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=155361
Printed Date: 05 Jun 2024 at 10:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Carco Winch for 65 HD-6

Posted By: kblackav8or
Subject: Carco Winch for 65 HD-6
Date Posted: 05 Nov 2018 at 9:31pm

Which Carco winch fits on a mid 60s AC HD-6? Will be looking for one in the Pacific Northwest in the next year or so.

Replies:

Posted By: donoman
Date Posted: 06 Nov 2018 at 6:55am

Carco E30 S-G or E24 the older EA Carco will also work but the E30 is the best of the 3

Posted By: Dale
Date Posted: 10 Nov 2018 at 6:28pm

Have a HD6G with a Carco on it. I'm too far I'm sure (Ontario Canada) but it is available.

Posted By: kblackav8or
Date Posted: 10 Nov 2018 at 7:49pm

Right now it would be nice to find one next summer.. maybe. It is a definite thing I want to put on the one I am buying once I have it and deal with some other projects.

Posted By: kblackav8or
Date Posted: 23 Mar 2019 at 2:43am

I found an E24 locally. They want $900 for it off a IH TD-9. No cable but it has all the control levers etc. Can anyone tell me about the E24? It looks a bit rough. I was thinking of offering less for it. I don't likely have a lot of big winching to do, some decent sized alder and maybe the occasional bigger fir. I haven't bought it yet. Want to know it is will work for what I need.

Posted By: HD6 Merv
Date Posted: 23 Mar 2019 at 3:38pm

E24 is ok; BUT drive shafts are different HD6 to TD9; so do some carefull checking of pto splines and driveshaft lengths.

Am 'told' driveshaft will fit but winch needs spacing back, or shaft needs modifying.

Stud patterns are same for TD9 and HD6.

The drum disconnect on a E24 can be weak; make sure they are fully engagaged if you have used the freespool. Other than that they are a good winch.

-------------
tits tyres and tracks

they all cost you money

Posted By: kblackav8or
Date Posted: 23 Mar 2019 at 7:25pm

Looks like I will keep shopping. It dropped off Craigslist already.

Posted By: kblackav8or
Date Posted: 19 Mar 2022 at 11:16pm

Will a Carco E work of a TD-9. I know that is an old one.