303 baler question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=15517
Printed Date: 04 Feb 2025 at 9:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 303 baler question
Posted By: Karl in MD
Subject: 303 baler question
Date Posted: 21 Jul 2010 at 3:01pm
|
Can anyone tell me whether the channel iron on the right side of a 303 pickup (it supports the two shafts and the guage wheel assembly) is supposed to be straight or should it have a bend in it where the pickup shaft goes through it? Thanks in advance. ------------- A man's got to know his limitations. '51 WD, Roto-Baler,, A-C rake, '44 C, '42 B |
Replies:
Posted By: nickia
Date Posted: 21 Jul 2010 at 7:40pm
| i believe it should be strait are you having troubles with your pu bars flipping over nick? call me if need to 641-373-0467 |
Posted By: Karl in MD
Date Posted: 22 Jul 2010 at 9:02am
|
No, someone ran into the side of the baler, and broke two chuncks out of the guide track for the rollers on the pickup bars. i'm fixing that, but I don't want a repeat of the damage. ------------- A man's got to know his limitations. '51 WD, Roto-Baler,, A-C rake, '44 C, '42 B |
Posted By: orangereborn
Date Posted: 22 Jul 2010 at 3:43pm
If it is this version/piece, I think it needs to be straight....Dale
|
Posted By: Karl in MD
Date Posted: 28 Jul 2010 at 11:53am
|
That's what i neede to see. Thank you. mine is just like that except the channel iron is bent. Now i know it needs to be straight. ------------- A man's got to know his limitations. '51 WD, Roto-Baler,, A-C rake, '44 C, '42 B |