Print Page | Close Window

F150 Door Locks

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=155107
Printed Date: 26 Sep 2024 at 12:54pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: F150 Door Locks
Posted By: 1955CA
Subject: F150 Door Locks
Date Posted: 28 Oct 2018 at 9:23am
Well I'm on my new plan now and am going backwards with any further vehicle purchases. I hate all this new technology, and I like being payment free.
So I just bought an old 2006 F150. But one thing I cannot stand is how all these modern vehicles lock the doors them selves. I'm capable of locking my own doors when I want to.

So before I remove all the lock mechanisms from it, does anyone know if this can be programmed out in the FICM or something?
I know my VW dealer told me it couldn't be done with my new VW's or i would lose other features. But I'm not sure if it can be done on this older Ford.

After owning new vehicles I'm looking forward to now having something i never have to wash and I don't care about people scratching and denting it everywhere I park. LOL.



Replies:
Posted By: injpumpEd
Date Posted: 28 Oct 2018 at 9:55am
Yes,that can be easily programmed off. Read the owner's manual. If you don't have it, get one off Ebay or?? Can shut off seat belt minder too. All sorts of customization options. Follow the directions to a tee.

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!


Posted By: JW in MO
Date Posted: 28 Oct 2018 at 11:18am
Originally posted by injpumpEd injpumpEd wrote:

Follow the directions to a tee.
Absolutely, read twice very slowly and in my case I should have done it aloud with someone listening.  I bought a new remote for my Isuzu years ago, to program it the instructions said to insert the key in the ignition, turn the key to the ACC position then back to the lock position 3 times within 3 seconds then close and open the drivers door 2 times.  I spent over an hour in the very cold with no luck until I finally realized you had to start out with the drivers door open because the next step after the key said, "CLOSE" and open the door twice.


-------------
Maximum use of available resources!


Posted By: Ted J
Date Posted: 28 Oct 2018 at 11:46am
Yep, READ all the directions (twice at least) and then punch enter.....  Now go do it!! Thumbs Up

Comes with old age JW....LOL


-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17


Posted By: 1955CA
Date Posted: 28 Oct 2018 at 6:15pm
OK  good to know.  Thank you gentlemen.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net