year and model of my tractor
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=154875
Printed Date: 27 Apr 2024 at 6:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: year and model of my tractor
Posted By: pmasson
Subject: year and model of my tractor
Date Posted: 17 Oct 2018 at 3:06pm
|
hi all I am new here and new with my first tractor... I bought what I thought was a AC D15, but have been told it is a D14... the number I get off it is 14 3480 . Can anyone help me find out for sure what year and model it is? Thank you
|
Replies:
Posted By: Bob D. (La)
Date Posted: 17 Oct 2018 at 3:24pm
|
Should be a 1957 D14. HTH ------------- When you find yourself in a hole,PUT DOWN THE SHOVEL!!! |
Posted By: Gary
Date Posted: 17 Oct 2018 at 3:40pm
|
Yup 1957, first year of production. 149 cu.in Engine, 6 volt electrical. Gary |
Posted By: pmasson
Date Posted: 17 Oct 2018 at 4:14pm
|
Thanks guys It has been changed to 12 volt. Which site is best for parts to order from? I am in Canada. Thanks again |
Posted By: Reindeer
Date Posted: 17 Oct 2018 at 4:19pm
|
I've ordered from Tony's Tractors, but that is for Alberta. Probably any one of the sponsors of the site can get you what you need. Not all that inexpensive with shipping and exchange being what it is. Napa can get most of the ignition parts that you may need, as well as filters. I find the rural Napas are best for tractor parts. The shops in town have to get out the book and are loath to do the work to sell a few things. ------------- |
Posted By: Bill Long
Date Posted: 17 Oct 2018 at 4:48pm
|
First Welcome to the Unofficial Allis Chalmers Forum As you have seen you will find all kinds of help here. To add another name of one of our sponsors - Sandy Lake. I have heard very good reports on them. For Ignition I would use SteveNJ Custom Circuits - another one of our sponsors. Our in house expert Good Luck! Bill Long
|
Posted By: DSeries4
Date Posted: 17 Oct 2018 at 9:15pm
Depends what parts you are looking for. For filters and ignition parts, NAPA has what you need. For more specific tractor parts, your local AGCO dealer is a good source. Don't forget the sponsors on this site here. Even though you are in Canada like me, they can still ship you what you need. If you do not have an operator's manual yet, I strongly recommend you get one. It will tell you everything you need to know about the tractor. Manuals can be found pretty cheap on E-bay, but I would never buy parts from there! ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
pmasson wrote:Posted By: wfmurray
Date Posted: 18 Oct 2018 at 9:06am
| Got a oil filter from NAPA for my B . It was a Gold 7011.Same filter fits a 14.Also a fram f 159. Little bit pricey too ! |
Posted By: SteveM C/IL
Date Posted: 19 Oct 2018 at 10:29pm
Seems all the filter prices have jumped for everything.
|