Garden Tractors - Gear Ratios for Pulling

Print Page | Close Window

Gear Ratios for Pulling

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=154262
Printed Date: 01 Oct 2024 at 5:25pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Gear Ratios for Pulling

Posted By: KevinON
Subject: Gear Ratios for Pulling
Date Posted: 24 Sep 2018 at 2:34pm

Hi all. I am pulling with my 716 Six Speed, and have a rebuilt 16HP Kohler in it that has a bit more hp than normal.....lol. I am pulling in 2nd gear, with a stock 7" driven pulley on the transaxle. I need to get a bit more speed than the 4.2 mph that I am clocking now. I have 26x12x12 puller tires on it now. Should I put a 5.5" pulley on it and run 2nd, or go with a 9" pulley and run 3rd gear? The nine inch should slow third down from the 6.7 or 6.8 mph it might be with the stock 7" pulley. I am looking to get just over 5mph if I can. Just looking for thoughts.....thanks!!

Replies:

Posted By: HudCo
Date Posted: 27 Sep 2018 at 9:49am

some one on here should know what gear is the strongest in the trans then gear for that one

Posted By: HudCo
Date Posted: 27 Sep 2018 at 9:51am

the bigger belt pullys will sllip less but will probley be working ona little gear