Farm Equipment - D 15 Series 1 Starter

Print Page | Close Window

D 15 Series 1 Starter

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=153655
Printed Date: 15 Oct 2025 at 3:02pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D 15 Series 1 Starter

Posted By: ACinSC
Subject: D 15 Series 1 Starter
Date Posted: 04 Sep 2018 at 1:59pm

Pulled my starter as all it'll do is click . Sure looks worn out. I'm boxing it up and sending it to Steve for a rebuild . Under the starter is a maybe 1" by 6" lever? Anyone know what this is ? One end is attached to the top of the torque tube . Other end has a hole but not attached to anything . THANKS

Replies:

Posted By: DrAllis
Date Posted: 04 Sep 2018 at 2:12pm

They all have that. Belt pulley shifter.

Posted By: wfmurray
Date Posted: 04 Sep 2018 at 2:15pm

Put belt pulley in gear . Hole in right of dash for rod to come through.

Posted By: ACinSC
Date Posted: 04 Sep 2018 at 3:15pm

Ok , no wonder it's not hooked up . Don't have a belt pulley . Thanks !!

Posted By: ACinSC
Date Posted: 04 Sep 2018 at 3:59pm

Also wonder how the starter nose cone gets broken . Mine has been welded . Our diesel D 15 starter has too .

Posted By: Hubert (Ga)engine7
Date Posted: 04 Sep 2018 at 5:49pm

Lots of torque on the starter and over time hard engagements or a bit of binding/misalignment will cause them to crack.

Go Dawgs!

-------------
Just an old country boy saved by the grace of God.

Posted By: ACinSC
Date Posted: 04 Sep 2018 at 5:54pm

Makes sense . Thanks