Farm Equipment

Print Page | Close Window

180

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=153054
Printed Date: 30 May 2025 at 11:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 180

Posted By: Ryan T
Subject: 180
Date Posted: 15 Aug 2018 at 2:39pm

Fired up my 180 this afternoon and went to pull it out of the shop and it’s like it didn’t won’t to move on the high side. All fluids are good please let me know of any tricks out there. I can’t afford to a new torque right now thanks

Replies:

Posted By: DougG
Date Posted: 15 Aug 2018 at 6:31pm

Not many till you diagnose the pressure on the clutch pack, put in low side for now

Posted By: MACK
Date Posted: 15 Aug 2018 at 9:35pm

Does it move ok in lo? MACK

Posted By: Ryan T
Date Posted: 15 Aug 2018 at 9:40pm

Yes moves great in all gears on the low side. Just acts like a clutch slipping when you go into hi

Posted By: shameless dude
Date Posted: 15 Aug 2018 at 11:28pm

clutch adjustment? may not take much

Posted By: Ryan T
Date Posted: 16 Aug 2018 at 1:20am

Shameless the clutch pedal is already in gauged it’s the hand clutch by the throttle lever. It’s also Diesel tractor. Is there a way to adjust that. Thanks everyone for trying to help me

Posted By: MACK
Date Posted: 16 Aug 2018 at 7:32am

Clutch plates broke in hi side. MACK

Posted By: ksbowman
Date Posted: 16 Aug 2018 at 7:36am

My 180 did that one time after mowing all day then never did it again. Didn't do it long enough for me to find out what was causing it. Since mine is a hydraulic power director I thought possibly something got caught up in a valve temporarily. Hope it doesn't happen again.