Farm Equipment - Diameter Needed

Print Page | Close Window

Diameter Needed - WC drawbar

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=15264
Printed Date: 04 Feb 2025 at 3:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Diameter Needed - WC drawbar

Posted By: Shane H. (Mi)
Subject: Diameter Needed - WC drawbar
Date Posted: 16 Jul 2010 at 7:01am

Like an idiot, I measured the hole in my drawbar last night, wrote it down and set it next to the wallet so I wouldn't forget it when I came to the shop this a.m....I forgot my dang wallet too!

If any of you fine gents could measure the drawbar hole (where you put your hitch pin thru) and let me know it'd save me a little time.

Thanks a bunch!

-Shane'r

Replies:

Posted By: Calvin Schmidt
Date Posted: 16 Jul 2010 at 7:42am

The hole in my WC drawbar is .84" wide and longer due to wear.

-------------
Nothing is impossible if it is properly financed

Posted By: Shane H. (Mi)
Date Posted: 16 Jul 2010 at 9:09am

Thanks Cal!

-S