rake teeth
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=152600
Printed Date: 07 Feb 2025 at 1:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: rake teeth
Posted By: darrel in ND
Subject: rake teeth
Date Posted: 30 Jul 2018 at 8:57pm
| I am fixing up an old snap coupler rake, the model that is PTO belt driven, and has two caster wheels in back. The teeth on it suck, most are the spring type, but a few rubber mounted are sprinkled on here and there. I want to replace all 100 of them with the spring type, but I am having trouble finding em. Could find the rubber mounted ones every where, but I would like to stick with the spring ones, because it seems that the rubber seems to dry rot and crack long before the teeth are worn out. I tried runnings, mills fleet farm, and TSC, and can't find any. Looked up shoups on line, and it doesn't appear that they have them either. Any of y'all have any luck getting them.....? Thanks, darrel |
Replies:
Posted By: SteveMaskey(MO)
Date Posted: 30 Jul 2018 at 9:25pm
| I use the old New Holland teeth on my 77 & 78 rake. They have a smaller spring like the AC |
Posted By: shameless dude
Date Posted: 31 Jul 2018 at 12:05am
| next time i'm at bomgaars i'll check for you! |
Posted By: darrel in ND
Date Posted: 31 Jul 2018 at 5:33am
I suppose that if they have them there, then I'd have to come down and see you to get them. Damn the luck! Darrel |
shameless dude wrote:Posted By: Dave (NE)
Date Posted: 31 Jul 2018 at 11:54am
| TSC and Orscheln's have them. |
Posted By: darrel in ND
Date Posted: 31 Jul 2018 at 1:28pm
I just ordered some from a place called Sloan express out of IL. 180 bucks for 110 of them shipped to my front door. Hope they're worth a  . I checked at local TSC last night, and they didn't have what I needed, but comparable ones were over three bucks a piece. Darrel
|
Posted By: shameless dude
Date Posted: 31 Jul 2018 at 10:54pm
| you'll do anything to keep from coming back here! PffffT! |
Posted By: darrel in ND
Date Posted: 01 Aug 2018 at 7:38am
Oh, I am looking forward to coming to see you again. Just that I need these rake teeth pretty quickly. Maybe when DJ comes to see you, I'll show up. Looking forward to some home made Chile. And while Joe has you distracted, I'll be looking for the machine! Darrel |
Posted By: farmboy520
Date Posted: 01 Aug 2018 at 7:54am
|
Posted By: PaulB
Date Posted: 02 Aug 2018 at 1:43pm
Are these the teeth you're looking for?  ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: darrel in ND
Date Posted: 02 Aug 2018 at 8:36pm
| No, Paul. I needed the single teeth. I would guess that they should be here tomorrow. Thanks, Darrel |
Posted By: shameless dude
Date Posted: 02 Aug 2018 at 11:52pm
| post a pic of which ones yer buying |
Posted By: coggonobrien
Date Posted: 03 Aug 2018 at 6:14am
|
These are what I run on my 78 https://www.shoupparts.com/RT64562-Rake-Tooth" rel="nofollow - https://www.shoupparts.com/RT64562-Rake-Tooth |