Farm Equipment - 226 Crank Cap Specs

Print Page | Close Window

226 Crank Cap Specs

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=15241
Printed Date: 04 Feb 2025 at 3:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 226 Crank Cap Specs

Posted By: BennyLumpkin
Subject: 226 Crank Cap Specs
Date Posted: 15 Jul 2010 at 5:10pm

I need the torque specs and order to torque my main caps....had to loosen then up to free things up to change out the rear main seal...pretty easy after that. Just need to tighten things back up....also the torque specs for the pan gaskets if there are any.....thanks ahead of time.

-------------
Central PA Allis Express
1934 WC254
1945 WF
1945 WC135755
1951 WD68085
1953 WD45-150217
1957 WD45D-230744D
B110

Replies:

Posted By: Mike(SEIN)
Date Posted: 15 Jul 2010 at 7:26pm

My I&T manuel says 85 ft lbs , I dont know if its any different for used bearings.

Posted By: LouSWPA
Date Posted: 15 Jul 2010 at 7:31pm

The torque would be the same, no matter the bearing.

-------------
I am still confident of this;
I will see the goodness of the Lord in the land of the living.
Wait for the Lord;
be strong and take heart and wait for the Lord. Ps 27

Posted By: BennyLumpkin
Date Posted: 15 Jul 2010 at 7:50pm

what about pattern to torque them in?

-------------
Central PA Allis Express
1934 WC254
1945 WF
1945 WC135755
1951 WD68085
1953 WD45-150217
1957 WD45D-230744D
B110

Posted By: Jason(OH)
Date Posted: 15 Jul 2010 at 9:33pm

Torque starting in the center and alternate side to side until you reach each end.