301 sleves
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=152363
Printed Date: 04 Dec 2024 at 1:35pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 301 sleves
Posted By: bradley6874
Subject: 301 sleves
Date Posted: 23 Jul 2018 at 11:43am
|
Looking for a set of sleeves and pistons for a 301 with a 3.75 yeah it's smaller we have a 280 cubic inch limit going in a wd45 3500 lbs our club is 17 mph other club is no limit ------------- You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul |
Replies:
Posted By: bradley6874
Date Posted: 24 Jul 2018 at 2:08pm
|
I think there's a jd sleeve that fits but I don't know the first thing about green stuff any help ------------- You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul |
Posted By: Shawn PA
Date Posted: 25 Jul 2018 at 11:07am
| Deere 466 sleeves will fit in a WD block but they are some work to do them. |
Posted By: WD45
Date Posted: 14 Aug 2018 at 6:30pm
|
What kind of power will you get with the WD. ------------- Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H |
Posted By: Shawn PA
Date Posted: 15 Aug 2018 at 9:04am
| Mine was a 17 block bore was 4.625 and 6"stroke made 115 with basically stock head carb and manifold. |
Posted By: Big Orange
Date Posted: 30 Sep 2018 at 1:29pm
| HA, Bradley gas or diesel ? |
Posted By: Big Orange
Date Posted: 30 Sep 2018 at 1:51pm
| A 180 gas sleeve is 3.75, but the 180 had a shorter stroke crankshaft, so the pistons won't work. They were 265 cubic inch, i don't think AC ever built a diesel 265 cubic inch,or a 3.75 bore with 301 crankshaft. GOOD LUCK |
Posted By: bradley6874
Date Posted: 01 Oct 2018 at 6:41am
|
Diesel the 1 running in the class now used the gas sleeves and diesel pistons and cut the outside of the Piston down and recut the rings that's gives you 281 cubic inch going in a WD at 3500 lbs ------------- You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul |
Posted By: WF owner
Date Posted: 01 Oct 2018 at 6:54am
I thought your cubic inch limit was 280 ???
|
bradley6874 wrote:Posted By: bradley6874
Date Posted: 01 Oct 2018 at 8:17am
|
It's supposed to be on economy class so the 281 they said they would let that go otherwise to get rid of that one cubic inch do you have to do custom sleeves and custom Pistons ------------- You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul |
Posted By: gcalent
Date Posted: 07 Nov 2018 at 11:38am
|
The guys I talked to that have done this to a 301, used the 265 gas sleeves and then turned the 301 pistons to fit, fairy simple fix. With the small sleeves and the longer stroke of the 301 diesel it works out. ------------- Pullin With AC |
Posted By: gcalent
Date Posted: 07 Nov 2018 at 11:42am
|
I can help you out with the machine work if you decide to try it ------------- Pullin With AC |