Farm Equipment - 226 Pan Gasket

Print Page | Close Window

226 Pan Gasket

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=15233
Printed Date: 04 Feb 2025 at 6:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 226 Pan Gasket

Posted By: Claus
Subject: 226 Pan Gasket
Date Posted: 15 Jul 2010 at 12:46pm

Who makes the best oil pan gasket for the 226? Need one!

Replies:

Posted By: joshjohndeere
Date Posted: 17 Jul 2010 at 8:26pm

felpro makes a good cork gasket and i will give u a bit of advice if u are putting it in an engine still in the tractor roll your from and rear main pieces in a tight circle and hold like that with a rubber band then soak them in a cup of water overnight. this makes them swell alittle and more pliable. then position on the pan and on the outsideof the pan stick needle in the gasket to center it. put the pan and gasket up and bolt down, pull your pins and its all good.

Posted By: Dave(inMA)
Date Posted: 17 Jul 2010 at 8:38pm

Now that sounds like a good process, josh. Oughta work on any of those gasket sets. I've seen the "curl overnight" suggestion before but you've added a couple of good ideas.

-------------
WC, CA, D14, WD45