Farm Equipment - Final drive pans

Print Page | Close Window

Final drive pans

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=152163
Printed Date: 29 Sep 2025 at 4:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Final drive pans

Posted By: MrAcWd
Subject: Final drive pans
Date Posted: 17 Jul 2018 at 6:00am

Do the final drive pans on a Wd/Wd45 fit on a D14 and is there any other good Allis salvage yards besides All State Ag Parts

Replies:

Posted By: jaybmiller
Date Posted: 17 Jul 2018 at 6:34am

gee hard to believe the pan could wear out...always covered in oil. Any chance you could just weld a patch over the hole ? Presuming it's got a hole in it?

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: WF owner
Date Posted: 17 Jul 2018 at 7:41am

They take different gaskets, so I expect the pans are different.

From what I've seen, B, C, CA, D-10, D-12, D-14 & D-15 take the same gasket.

WD, WD-45 & D-17 take the same gasket, but it's different from the D-14.

Posted By: HoughMade
Date Posted: 17 Jul 2018 at 9:08am

They may not rust out, but they can get beat all to holy heck.

-------------
1951 B

Posted By: MrAcWd
Date Posted: 17 Jul 2018 at 9:59am

Thanks Someone try welding it before I got the tractor unsure what happened just that a wd one here

Posted By: Allis dave
Date Posted: 17 Jul 2018 at 10:34am

Lookup Orange Knight or Bill Deppe on here. They both would have final drive pans I bet.