need cessana pressure valve spring
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151828
Printed Date: 17 May 2024 at 6:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: need cessana pressure valve spring
Posted By: bigfish_Oh
Subject: need cessana pressure valve spring
Date Posted: 05 Jul 2018 at 8:53am
I found my issue the first place i looked. I'll assume Dad cranked pressure high(as on everything) and stressed spring. I put 3 washers in to shim it and everything works fine. I would like to get the correct spring. ------------- 1941 WC sat for 29 years,started & dynoed 27 h.p. 1957 WD45 Grandpa bought new,factory p.s.,added wfe 1951 WD, factory p.s. 1960 D14 HnMk IV BkHoe 4 sale 2014 HD Tri Glide 2009 GMC CC SLT Dually |
Replies:
Posted By: CAL(KS)
Date Posted: 05 Jul 2018 at 8:57am
|
you might specify what this is for and if it is industrial you might be able to find a part number in Minnpar parts books. ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: bigfish_Oh
Date Posted: 05 Jul 2018 at 4:49pm
|
1960 D14 HnMk IV BkHoe ------------- 1941 WC sat for 29 years,started & dynoed 27 h.p. 1957 WD45 Grandpa bought new,factory p.s.,added wfe 1951 WD, factory p.s. 1960 D14 HnMk IV BkHoe 4 sale 2014 HD Tri Glide 2009 GMC CC SLT Dually |
Posted By: DMiller
Date Posted: 07 Jul 2018 at 6:23am
| Check with a local Hydraulics shop, Eaton and Cessna are a combined company now, may be something still available. |
Posted By: acer
Date Posted: 10 Aug 2018 at 11:57am
| I have a extra valve block assembly for an I-600 which I think has the same Cessna control valve that I could rob the spring out of for you. just need to know what section it came out of. |
Posted By: Corey743
Date Posted: 10 Aug 2018 at 12:47pm
| If you can get the dimensions of the spring you should be able to find a machine shop near you that could wind you a new one. |