G Master Tool Carrier new lesson learned
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151760
Printed Date: 19 Jul 2025 at 9:25am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: G Master Tool Carrier new lesson learned
Posted By: ibleedorange
Subject: G Master Tool Carrier new lesson learned
Date Posted: 03 Jul 2018 at 2:32pm
|
I've been working around G's for what seems like forever and I saw a new one today. The Master Tool Carrier front arm on one of the 5 Master Tool Carriers I'm rebuilding is different than the others. The outside diameter on the odd one is 1¼" and the others are 1½". Any body know about this?  ------------- Tractors; If it runs, use it. Motorcycles: Ride em like today is your last day. |
Replies:
Posted By: Bill Long
Date Posted: 04 Jul 2018 at 11:19am
|
It is always interesting to me since with my father we sold the G for the life of the unit however, surprising new information is found on this site. No I did not know of that difference in the tool carrier but knowing Allis Chalmers they were always improving the product. Lots of improvements came out before a new model was developed. Such as the helical - constant mesh - transmission appeared in the very late WD tractors and was standard in the WD-45. I would imagine experience showed that there was some weakness in the tool carrier and Allis Chalmers increased the size for additional strength. Interesting. Thanks for sharing. Good Luck! Bill Long
|
Posted By: JoeM(GA)
Date Posted: 04 Jul 2018 at 11:28am
|
Probably got drilled for bushings sometime in its long life ------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |
Posted By: johnkc
Date Posted: 04 Jul 2018 at 11:51am
|
Joe, the outside diameter is larger. ------------- I support the development of hybrid automobiles and alternative fuels as I need DIESEL fuel for my ALLIS CHALMERS! |
Posted By: Dusty MI
Date Posted: 04 Jul 2018 at 12:40pm
|
My parts book does not show any changes, or up dates, and it has an April 1961 date on the front of it. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |