Pulling Forum - 190 power director delete

Print Page | Close Window

190 power director delete

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151566
Printed Date: 23 Nov 2024 at 8:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190 power director delete

Posted By: Justthemechanic190
Subject: 190 power director delete
Date Posted: 25 Jun 2018 at 9:28pm

Looking into deleting the power director and just going to a straight shaft on our 190. From what I’ve gathered so far just get a PTO coupling to install on the shafts. But what about the hydraulics running it. If we delete it will the tractor still be able to have functioning hydraulics. Would rather do the mechanical power director that so many have talked about, but lack of a proper place to tear it down for the needed amount of time kinda throws that out.

Replies:

Posted By: bradley6874
Date Posted: 26 Jun 2018 at 1:54pm

You have to split the tractor to do either one I found a gleaner drive coupling that fit perfect if I have to do it again it's going to get the two speed manuelbox I need low 4th back it's a big step from high 3rd to high 4th

-------------
You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul