Pulling Forum - wd carb help please

Print Page | Close Window

wd carb help please

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151238
Printed Date: 23 Nov 2024 at 7:34pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: wd carb help please

Posted By: graveyard
Subject: wd carb help please
Date Posted: 12 Jun 2018 at 9:05pm

Need a little help. Not a great carb man. Bought a wd with a gleaner z in it. wouldn't idle so I changed some things and got it to idle. In the process of taking apart several times it will now idle but when I give it gas it kicks the governor in and out in and out repeatedly. If I fool with the load adjustment it will smooth out but as soon as move throttle does the same thing again. Throttle rod may be an 1/8 to a 1/4 inch short. Could it be this or in the load adjustment needle?

Replies:

Posted By: DrAllis
Date Posted: 13 Jun 2018 at 7:13am

Governor link rod too short will make the governor more jumpy, so it could be your problem, but not guaranteed to be your problem.

Posted By: graveyard
Date Posted: 13 Jun 2018 at 8:25am

thanks dr allis that's what I was thinking they had tried to modify it for speed pulling and made it a little shorter.