Farm Equipment - D 19 3point hitch

Print Page | Close Window

D 19 3point hitch

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151199
Printed Date: 15 Nov 2024 at 6:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D 19 3point hitch

Posted By: Bob (IN)
Subject: D 19 3point hitch
Date Posted: 11 Jun 2018 at 3:28pm

My two d 19 the three point does not stay up in the neutral position you have to keep in the raise position then when you push in the clutch it goes down or at idle it won’t stay up my d19 snap coupler does the same

-------------
great-grandpa's wc with picker, 20/35, speed patrol, uc, m crawler, 620, 653 dozer d21 d17 d19

Replies:

Posted By: MACK
Date Posted: 11 Jun 2018 at 9:32pm

There is a check valve between top and lower valve stacks. Separate the two, unscrew check valve, then unscrew inner part if it don't come with first part. There is a copper washer that may be broke. Replace copper washer and orings. Tighten inner part with copper washer, tighten all you can, drop the ball in and pound it with soft bolt and hammer. Repeat until it does not turn any more. Reassembly with new orings. MACK

Posted By: Greg W
Date Posted: 19 Jun 2018 at 1:35pm

My dealer can't identify that copper washer. Do you have a part number for that and the check ball?