Farm Equipment - Is this work around ok to do

Print Page | Close Window

Is this work around ok to do

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151160
Printed Date: 15 Nov 2024 at 6:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Is this work around ok to do

Posted By: EPALLIS
Subject: Is this work around ok to do
Date Posted: 09 Jun 2018 at 11:25pm

Today I went to get my D-17 out of storage. Charged the battery and then went to start her. Nothing. Then I got a spark from the negative cable. So, I didn't have a new cable as it is showing it's age. So, I found 3 copper washers, inserted them in the cable gap. Then retightened up and it started just fine. Is this a safety concern or is it ok to do this for a couple weeks until I can get a new cable?

Thanks in advance for any thoughts.

Replies:

Posted By: shameless dude
Date Posted: 09 Jun 2018 at 11:56pm

sounds like it works o-k, i'd still replace the cable as soon as you can tho!

Posted By: shameless dude
Date Posted: 09 Jun 2018 at 11:58pm

I've taken a small nail or screw and loosened the clamp, put the nail or screw in the opening then tightened it back up before. worked for worn out clamps. until I could replace them

Posted By: jaybmiller
Date Posted: 10 Jun 2018 at 6:06am

OK for now, but get TWO cables ( + and - ) when you're in town !

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water